Ryobi RY43200 Manuel D'utilisation page 15

 Do not cut from a ladder, rooftop, or other
unstable support; this is extremely dangerous.
Leave larger cutting operations for profession-
als.
 When cutting branches that are lying on the
ground, make sure the location is clear of other
objects, electric wires, cables, etc., before cut-
ting. Also be aware of the position of your feet
before cutting items on the ground.
 Make sure the tool is running at full speed before
attempting to cut.
 Allow chain to cut for you; exert only light down-
ward pressure. If you force the cut, damage to
the bar, chain, or motor can result.
 Release the trigger as soon as the cut is com-
pleted.
Failure to follow proper cutting procedures can
result in the bar and chain binding and becom-
ing pinched or trapped in the limb. If this should
happen:
 Stop the motor and disconnect from power
supply.
 If the limb can be reached from the ground,
lift the limb while holding the saw. This should
release the "pinch" and free the saw.
 If the saw is still trapped, call a professional for
assistance.
OPERATION
Page 15 — English
Fig. 9
Fig. 10