Technical Data; Defi Nitions: Safety Guidelines - DeWalt D26411 Traduction De La Notice D'instructions Originale

EN GLI SH
HEAT GUN
D26411, D26414
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

D26411
Voltage V 220-240
UK & Ireland V 230/115
Type
Power input W 1800
Power input (115V) W 1600
Air temperature range ºC 50–400
(at nozzle) and 50–600
Weight kg 0.65
L (sound pressure) dB(A) 68
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A) 79
WA
K (sound power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum)
Vibration emission value a
h
a = m/s² 0.86
h
Uncertainty K = m/s² 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test and may be used to compare one
tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
24
D26414
220-240
Fuses
230/115
Europe
1 1
U.K. & Ireland
2000
This device is intended for the connection to a
1600
power supply system with a maximum permissible
50 –400 system impedance Zmax of 0,1 Ω at the interface
point (power service box) of the user's supply. The
and 50–600
user has to ensure that this device is connected
0.71
only to a power supply system which fulfills the
requirements above. If necessary, the user can ask
68
the public power supply company for the system
impedance at the interface point.
3 3
Defi nitions: Safety Guidelines
79
The definitions below describe the level of severity
for each signal word. Please read the manual and
3 3
pay attention to these symbols.
0.86
1.5
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.