Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENG
2.1 Inlet adapters (SAKI******)
2.1.1
Steam inlet adapters (SAKI******)
The choice of inlet connections for the ultimateSAM distributor is shown in
Figure 2.a. The choices include:
•
For atmospheric steam delivery systems,
-
8-to-1, 4-to-1 and 2-to-1 adapters for 40 mm (1.6") pipes;
-
Single connection for 80 mm (3 1/8") ID steam hose
•
For pressurized steam delivery systems,
-
Straight or elbow threaded pipe connections (1", 1½", 2", and 2½" size)
•
150mm (6") Inlet Extension (if needed to pass through the duct wall),
either with or without a condensate drain fitting (¾" male threaded pipe)
The codes for inlet adapter kits are shown in Table 2.a. Each inlet kit includes
the following:
•
inlet adapter
•
gasket
•
fastening elements.
SAKI
x
2
1
ID prefix
Description
Style:
E = Threaded Elbow
P = Threaded Male Pipe
T = Straight Tube
X = Extension
Size:
40 = 40mm
44 = 1"
64 = 1 ½"
80 = 80mm
84 = 2"
94 = 2½"
Inlets:
1 = Single
2 = Double
4 = Quad
8 = Inlets
Region:
U = North America
0 = Other
---
---
For installations requiring an extended inlet for the distributor, a 150 mm
(6") extension adapter (SAKIX80100) is also available. The extension adapter
has the same mounting flange on both ends.
"ultimateSAM - user" +03U0070EF - rel. 2.0 - 20150301
2. STEAM INLET CONNECTIONS
Fig. 2.a
xx x x 0
3
4
5
6
Specifics regarding the inlet connection on available inlet adapters are
shown in Table 2.b. For weights and dimensions of the adapters, see the
"Technical specifications" manual.
Inlet Size
"****E***0*
****P***0* "
"SAKI*401*0
n/a
SAKI*402*0
SAKI*404*0"
SAKI*441*0
G male
SAKI*641*0
G male
SAKI*801*0
n/a
SAKI*841*0
G male
SAKI*941*0
G male
¹ The SAKIE***U* consists of an SAKIP***U* with a female pipe elbow
attached.
² 80mm ID steam hose can slide over the OD of 3" copper tubing.
2.1.2
Steam inlet adapters for SA0 (single-pipe)
The ultimateSAM SA0 has a steam inlet with 11/2 "GAS or 1 ½ " NPT (American
market) fitting. When supplied with pressurized steam no adapters need to be
used, simply connect the steam inlet on the manifold to a 11/2 " GAS (1 ½ "
NPT) pipe.
If the distributor is supplied with steam at atmospheric pressure, a stainless steel
adapter is available for installation directly on the manifold inlet. This adapter
features GAS or NPT female thread. The adapter guarantees connections to 40
mm rubber hoses; secure the hoses to the adapter using a clamp.
The codes for the steam inlet kits are shown in Table 2.a.
SAKI 0 64 1 x 0
Family prefix
Pos.
Meaning
type
-
dimension
number of inputs
Region
Free
GAS 1
(NPT 1
For the dimensions and weights of the adapters, see the "Technical
specifications" manual.
Tab. 2.a
14
Inlet connections
Style, Region Codes
****T***0*
****P***U*
for 40 mm ID hose
n/a
n/a
NPT male
n/a
n/a
for 80 mm ID hose²
n/a
n/a
NPT male
n/a
n/a
5
6 7
8
9
10
Option
0
48
64
1
U
North America (NPT)
0
0
1/2"
1/2"
)
****E***U*
n/a
NPT female¹
n/a
n/a
NPT female¹
n/a
Tab. 2.b
Description
For SA0*
1" NPT
2" NPT
1 1/2"
Single
Other (GAS)
Tab. 2.c
Publicité
Chapitres
Table des Matières
Dépannage
