Unauthorised Modification And Spare Parts Manufacture; Life Span; Safety Measures Taken By The Operator; Workforce Requirements - Ecolab Rotorsprayintegra Plus Manuel D'utilisation

Safety
2.2.2

Unauthorised modification and spare parts manufacture

CAUTION!
Unauthorised modifications or changes are only permissible following
discussion with and the approval of the manufacturer.
Original spare parts and accessories authorised by the manufacturer ensure
safety.
The use of other parts excludes liability for the consequences arising
from this.
2.3

Life span

Depending on properly conducted maintenance (visual inspection, functional testing,
replacement of parts, etc.), the life span is approximately 2 years.
Components that come into contact with product are excluded from the
warranty!
2.4

Safety measures taken by the operator

It is expressly up to the owner to train, monitor and instruct his operating and maintenance
personnel so that they comply with all of the necessary safety measures.
The frequency of inspections and controls must be complied with and documented.
2.5

Workforce requirements

Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If inadequately qualified personnel work on the system or are in the hazardous
area, hazards may arise that can cause serious injuries and significant material
damage.
– All work must be carried out by qualified personnel only!
– Keep unqualified personnel away from hazard areas.
NOTICE!
Only those individuals who can be expected to perform their work reliably are
authorised as personnel. Individuals whose reactions are impaired, e.g. by
drugs, alcohol, medicines, are not authorised. When selecting personnel, the
valid age and occupation-specific regulations must be observed.
417101448 Rev. 04-02.2019 12