Safety; General Safety Advice; Proper Use; Reasonable Foreseeable Incorrect Use - Ecolab Rotorsprayintegra Plus Manuel D'utilisation

2

Safety

2.1

General safety advice

DANGER!
If you believe that the rotor spray can no longer be operated safely, you must
place it out of operation immediately and secure it so that it cannot be used
inadvertently.
This applies:
– If visible damage occurs,
– If the rotor spray no longer appears to be operational,
– After prolonged periods of storage under unfavourable conditions
(carry out a function test).
The following instructions must always be observed:
– The safety regulations and the required protective clothing for work with
chemicals, adhesives and oils must be complied with.
– Attention must be paid to all information included on the product data sheet
for the dosing medium used.
2.2

Proper use

WARNING!
Proper use particularly includes the following points:
– The rotor spray is used for the dosing of liquid, adhesives and oils.
– The metering valve has been developed, designed and built for industrial
and commercial use. The unit is not intended for private use.
Any use which extends beyond or differs from the appropriate use is
considered improper use.
2.2.1

Reasonable foreseeable incorrect use

To maintain the function of the metering valve, please take care to avoid the following in
particular:
n Incorrect use of design versions
(e.g. incorrect sealing materials).
n Excessive ambient temperatures.
n Excessive media temperature.
n Incompatible accessory parts.
n Incorrect dosing lines.
n Line cross-sections too small.
n Viscosities too high or too low.
n Use of unsuitable dosing media.
11
Safety
417101448 Rev. 04-02.2019