Safety; General Safety Advice; Proper Use; Reasonable Foreseeable Incorrect Use - Ecolab MULTILINE 1000-S Manuel D'utilisation

2

Safety

Repairs may only be carried out with plug disconnected from the mains, or when the
appliance is dead.
During maintenance and repair work on parts which come into contact with cleaning
products, and when replacing the bindings, the pre-scribed protective clothing
(protective glasses, protective gloves, apron) must be worn because of the danger of
irritation.
Only original spare parts must be used for repairs.
2.1

General safety advice

DANGER!
If you believe that the rotor spray can no longer be operated safely, you
must place it out of operation immediately and secure it so that it cannot be
used inadvertently.
This applies:
– If visible damage occurs,
– If the rotor spray no longer appears to be operational,
– After prolonged periods of storage under unfavourable conditions
(carry out a function test).
The following instructions must always be observed:
– The safety regulations and the required protective clothing for work with
chemicals, adhesives and oils must be complied with.
– Attention must be paid to all information included on the product data
sheet for the dosing medium used.
2.2

Proper use

WARNING!
Proper use particularly includes the following points:
– The rotor spray is used for the dosing of liquid, adhesives and oils.
– The metering valve has been developed, designed and built for
industrial and commercial use.
The unit is not intended for private use.
Any use which extends beyond or differs from the appropriate use is
considered improper use.
2.2.1

Reasonable foreseeable incorrect use

To maintain the function of the metering valve, please take care to avoid the following in
particular:
n Incorrect use of design versions (e.g. incorrect sealing materials).
Excessive ambient temperatures.
n
n Excessive media temperature.
11
Safety
417101439 Rev. 2-09.2019