Structure Of The Multiline 1000S; Front Panel - Ecolab MULTILINE 1000-S Manuel D'utilisation

5

Structure of the Multiline 1000S

5.1

Front panel

11
9
Fig. 2: Front panel
1 Liquid Crystal display
2 'Alarm' LED Display (red):
Flashes if a problem occurs and/or if the 'Empty'
signal is transmitted. More detailed information on
Display
3 Pressure gauge:
Indicates spray air pressure
4 Pressure controller:
Setting for spraying air pressure
5 'ENTER' acknowledge/cancel button:
This is used to confirm parameters selected and to
abort metering
6 'Down' setting button
This is used for adjustment of the metering time and for
decreasing the values set for the parameters
7 'Up' setting button
1
7
10 8 6 5
Structure of the Multiline 1000S
3
2
This is used for adjustment of the metering time and for
increasing the values set for the parameters
8 'MAN' button for manual mode of operation:
Pressing the MAN button activates manual mode of
operation
9 'AUTO/CONT' button for toggling between
continuous and automatic mode:
Toggles between automatic and continuous operation.
The corresponding appurtenant LED illuminates.
10 'CONT' LED indicating 'Continuous operation'
(green):
The unit is in continuous mode of operation
11 'AUTO' LED indicating 'Automatic operation'
(green):
The unit is in automatic mode of operation
19
4
417101439 Rev. 2-09.2019