Unauthorised Modification And Spare Parts Manufacture; Safety Measures Taken By The Operator; Personnel Requirements - Ecolab MULTILINE 1000-S Manuel D'utilisation

Safety
n Incompatible accessory parts.
n Incorrect dosing lines.
n Line cross-sections too small.
Viscosities too high or too low.
n
n Use of unsuitable dosing media.
2.2.2

Unauthorised modification and spare parts manufacture

CAUTION!
Unauthorised modifications or changes are only permissible following
discussion with and the approval of the manufacturer.
Original spare parts and accessories authorised by the manufacturer
ensure safety.
The use of other parts excludes liability for the consequences arising
from this.
2.3

Safety measures taken by the operator

It is expressly up to the owner to train, monitor and instruct his operating and maintenance
personnel so that they comply with all of the necessary safety measures.
The frequency of inspections and controls must be complied with and documented.
2.4

Personnel requirements

Qualifications
DANGER!
Risk of injury if personnel are inadequately qualified!
If inadequately qualified personnel work on the system or are in the
hazardous area, hazards may arise that can cause serious injuries and
significant material damage.
– All work must be carried out by qualified personnel only!
– Keep unqualified personnel away from hazard areas.
NOTICE!
Only those individuals who can be expected to perform their work reliably
are authorised as personnel. Individuals whose reactions are impaired, e.g.
by drugs, alcohol, medicines, are not authorised. When selecting
personnel, the valid age and occupation-specific regulations must be
observed.
Mechanic
The mechanic is trained for the particular range of tasks in which s/he operates and
knows the relevant standards and regulations. The mechanic can perform work on
pneumatic and hydraulic systems because of his/her specialized training and experience
and can independently recognise and avoid potential dangers.
417101439 Rev. 2-09.2019 12