Hedge Trimmer Safety Warnings; Additional Safety Rules; Transportation And Storage - Ryobi RHT1851R15 Traduction Des Instructions Originales

BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that safety of the power tool is maintained.

HEDGE TRIMMER SAFETY WARNINGS

Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed materials.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
Carry the hedge trimmer by the handle with cutter
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring. Cutter Blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.

ADDITIONAL SAFETY RULES

Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string which can
be thrown or become entangled in the cutting means.
Beware of thrown objects; keep all bystanders, children,
and pets at least 15m away from work area.
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Inspect the machine before each use. Check for loose
fasteners, fuel leaks, etc. Make sure all guards, and
handles are properly and securely attached. Replace
any damaged parts before use. Check for battery pack
leaks.
Do not modify the machine in any way.
Do not allow children or untrained individuals to use this
unit.
2 | English
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Do not use this machine when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
Before starting the machine, make sure the cutting
blades will not come in contact with anything.
While operating the hedge trimmer, always hold it
firmly with both hands by the two handles and ensure
that the operating position is safe and secure. The
manufacturer does not recommend the use of steps or
ladders. If higher trimming is required use and extended
reach tool.
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. NEVER
touch blade or service unit unless the battery pack is
removed.
Switch off and remove the battery pack off before:
adjusting the working position of the cutting device
cleaning or clearing a blockage
leaving the product unattended
checking, maintenance or working on the machine
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger
than 18 mm thick for RHT1851R15 or 22 mm thick for
RHT1855R40 and OHT1855R, or those obviously too
large to feed into the cutting blade. Use a non-powered
hand saw or pruning saw to trim large stems.
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
WARNING
If the machine is dropped, suffers heavy impact or begins
to vibrate abnormally, immediately stop the machine and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorized service centre.

TRANSPORTATION AND STORAGE

Stop the machine, remove the battery and allow both to
cool before storing or transporting
Clean all foreign material from the product. Store it in a
cool dry and well-ventilated place that is inaccessible to
children. For extra safety, store the battery separately
from the hedge trimmer. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
Do not store outdoors.