Depressed Center Wheel Assembly And Disassembly - Hitachi G 14DL Instructions De Sécurité Et Mode D'emploi

DEPRESSED CENTER WHEEL ASSEMBLY
AND DISASSEMBLY
WARNING:
Be sure to turned off the switch and pull out the
battery.
1. Assembly
(1) Turn the disc grinder upsidedown so that the
spindle is facing upward.
(2) Align the oval-shaped indentation of the wheel
washer with the notched part of the spindle, then
attach them.
(3) Fit the protuberance of the depressed center wheel
onto the wheel washer.
(4) Screw the wheel nut onto the spindle.
(5) While pushing the push button with one hand, lock
the spindle by turning the depressed center wheel
slowly with the other hand.
Tighten the wheel nut by using the supplied
wrench as shown in Fig. 8.
Wrench
Wheel nut
Depressed center
wheel
Wheel washer
Spindle
Wheel guard
CAUTION: Tighten the wheel nut securely and
confirm that the depressed center
wheel does not wobble.
2. Disassembly
To remove the depressed center wheel, simply
reverse the above-mentioned procedure.
Tighten
Push
button
Fig. 8
English
15