Honda Power Products HSS970 Manuel De L'utilisateur page 65

Fuse (ETS, EWS)
If the fuse is blown, the starter motor won't operate.
In the event of blower fuse, replace it with another fuse of the rated
capacity only after investigating the cause for the failure. If the fuse is
replaced without correcting cause, the new fuse may blow quickly
again.
Never replace a blown fuse with any object other than another fuse of
the rated capacity. Using any other object such as wire or aluminum
foil may cause fires in wiring or other parts.
Fuse-replacement
1. Turn the engine switch to the OFF position and remove the key
before checking or replacing the fuse.
2. Remove the battery cover (see page
3. Remove the fuse holder cover and pull the fuse out.
4. Replace the fuse with a fuse of the same type and rating.
Specified fuse:
62
5 A, 30 A
FUSE HOLDER COVER
MAIN FUSE (30 A)
32 ).
SUB FUSE (5 A)