Honda Power Products HSS970 Manuel De L'utilisateur page 25

Height adjust lever (track type only)
Use the height adjust lever when changing the height of auger
housing.
1) Hold the handle with both hands and squeeze the lever.
2) Move the handle up and down to obtain the desired auger position.
3) Release the height adjust lever to lock the auger.
(1) LOW
(2) MIDDLE : Normal use
(3) HIGH
LOCK
FREE
Do not disassemble or throw into fire the gas assisted damper
assembly as it is filled with the high pressure gas. The assembly can
burst, causing injury.
Do not put your hand on or tie with a rope, or it may cause a
functional damage of the gas assisted damper assembly.
Work light
The light comes ON while the engine is running, and it goes OFF when
the engine stops. The light does not come ON when the engine switch
is turned ON unless the engine is started. The light can be adjusted up
or down.
22
: Hard snow or fine finish
: Deep snow or for transporting the snowblower.
HEIGHT ADJUST LEVER
STOPPER
UP
DOWN
WORK LIGHT
(3)
(2)
(1)