Sony VPH-G70Q Manuel D'installation page 88

Adjusting the Registration
88
(EN) Adjustments
B Vertical line adjustment
If the vertical line of the picture is as shown by the dotted line in the
illustrations below, adjust it with the corresponding arrow key so that it is
perpendicular to the vertical line (bold line illustrated on the left).
1
Press the BOW key.
The CROSS HAIR pattern appears.
You can also change to the 9 × 9 HATCH pattern by pressing the
PATTERN key.
2
Adjust the distortion as illustrated below with the B and b keys.
B :The upper and lower ends of the vertical line curve
towards the left while the center remains
unchanged.
b :The upper and lower ends of the vertical line curve
towards the right while the center remains
unchanged.
3
Press the SKEW key.
4
Adjust the distortion as illustrated below with the B and b keys.
B :The vertical line rotates counter-clockwise,
rotating around the center.
b :The vertical line rotates clockwise, rotating around
the center.
5
Repeat steps 1 to 4 until the red vertical line converges with the green
line.