Modifying Parts; Removing The Upper, Front, Rear Covers - Sony VPH-G70Q Manuel D'installation

Modifying Parts

Removing the Upper, Front and Rear Covers
Opening the upper cover
Most modifications can be performed only by opening the
upper cover.
1
Turn off the main power of the projector.
2
Unlock the two screws on the projector by using a screwdriver or a
coin edge, and then open the upper cover.
To remove the supplied tool
The tool is located on the back of the upper cover.
Loosen the screw by using a screwdriver or a coin edge and remove the
tool.
Locked Unlocked
Tool
17
Installation (EN)