Sony VPH-G70Q Manuel D'installation page 86

Adjusting the Registration
86
(EN) Adjustments
4
Press the SIZE key.
5
Adjust with the B and b keys so that the red and green lines in the
right and left encircled portions converge.
B: The horizontal scale is reduced.
b: The horizontal scale is expanded.
6
If the lines do not converge, press the LIN key and repeat steps 3 to 5.
7
If the CROSS HAIR pattern is off-centered on the screen, adjust the
centering again and repeat steps 1 to 6 for the horizontal scale
adjustment.
For details of the centering adjustment, see "Red CENT (centering)
adjustment" on page 85 (EN).
8
Press the LIN key.
9
Adjust with the V and v keys until parts (b) at the top and bottom are
of equal length.
V: The upper and lower horizontal lines are shifted upward while the
horizontal center line remains unmoved.
v: The upper and lower horizontal lines are shifted downward while
the horizontal center line remains unmoved.
10
Press the SIZE key.
11
Adjust with the V and v keys so that the red and green lines at the top
and bottom encircled portions converge.
V: The vertical scale is expanded.
v: The vertical scale is reduced.
12
If the lines do not converge, repeat steps 8 to 11.
13
If the CROSS HAIR pattern is off-centered on the screen, adjust the
centering again and repeat steps 8 to 12 for the vertical scale
adjustment.
For details of the centering adjustment, see "Red CENT (centering)
adjustment" on page 85 (EN).