Leckey Mygo Notice D'utilisation page 52

10.12 Flexible sacral
support
The flexible sacral support is used in
conjunction with the pelvic positioning
harness or Pelvic Cradle. To adjust the
height, depth and angle, loosen the bolts on
either side with the multi-tool provided.
Adjust the support to the correct angle then
retighten the bolts. The support will flex
back and forward to assist the child into the
preferred posture.
Always use caution to ensure fingers do
not become trapped when adjusting the
sacral support.
10.13 Lateral
supports
Loosen the socket cap (A) to adjust the
width, height and angle of the lateral supports
and retighten when you have achieved the
desired position.
To move flip away laterals, use knob B.
A
B
A