Leckey Mygo Notice D'utilisation page 35

9.8 Trunk harness
With your trunk harness you will receive
four adjustable side straps, two shoulder
straps and brackets, the bolts, washers
and locking nuts. Fix the connecting straps
to the backrest before attaching the trunk
harness. To attach the connecting straps in
the shoulder area of Size 1, slide the bracket
into the slot (A) and set at the desired height
using the bolts and washers provided.
For Size 2 the shoulder straps should
be attached into the shoulder section (B),
rather than the backrest.
C
A
A
C
The remaining four adjustable side straps
are attached directly without using brackets,
to the receiving holes either side of the
backrest (C). Simply attach the trunk harness
to the connecting straps. The side straps
are adjustable in length to accommodate
outdoor clothing.
B B