Leckey Mygo Notice D'utilisation page 14

7.5 Attaching the
headrest
To attach the head support slide the stem
into the reducing sleeve (A) and receiving
bracket. Ensure the slot in the reducing
sleeve is aligned with the slot in the receiving
bracket. Set to the desired position and
secure using the hand lever (B).
The Mygo Seating System has been
designed to interface with Whitmyer head
supports. The Whitmyer Lynx headsupport
(C) is attached in the same way as the
Leckey headrest. To attach Whitmyer
Pro-Series headsupports remove the spacer
collar (D) from the receiving bracket and
lock the vertical stem in position using the
ratchet handle. To attach an Otto Bock
headrest, use the relevant Otto Bock
adapter plate.
C
A
B
D
B