Measurement Data - Mettler Toledo SevenGo pro Mode D'emploi

7.2 M easurement data
1. Review
All
All stored measurement data can be reviewed; the most recent data saved appears on the display.
– Press Trans to send the measurement data (current single set) over the IR interface to the
print e r or PC.
Partial
The measurement data can be filtered according to 3 criteria.
●
Memory number (MXXX)
●
Sample ID
●
Measurement mode
Memory number
1 Enter the memory number of the data and press Review.
The measurement data is displayed.
2 Press Trans to send the measurement data (current single set) over the IR interface to the
print e r or PC.
Sample ID
1 Enter the sample ID and press Review.
The meter finds all stored measurements with this sample ID.
2 Scroll through the measurement data to review all measurements with the entered sample ID.
3 Press Trans to send the measurement data (current single set) over the IR interface to the
print e r or PC.
Measurement mode
1 Select a measurement mode from list and press Review. The meter finds all stored mea s ure-
ments of the selected measurement mode.
2 Scroll through the measurement data of the selected measurement mode.
3 Press Trans to send the measurement data (current single set) over the IR interface to the
print e r or PC.
2. Transfer
All or partially stored measurement data can be transferred by filtering the measurement data. The
fil t er works as described above in "Review".
– Press Trans to send the filtered measurement data over the IR interface to the printer or PC.
Delete
All or partially stored measurement data can be deleted by filtering the measurement data. The filter
works as described above in "Review".
Deletion is protected by a PIN. Upon delivery, the PIN is set to 000000. Change the PIN code to
pre v ent unauthorized access.
36 Data management
51710917_V02.2011_BA_SG9_98_EnFrEs.indb 34 21.04.2011 11:46:17