Using The Alphanumeric Keypad; Alphanumeric Input; Entering Ids/Pin - Mettler Toledo SevenGo pro Mode D'emploi

4.7 U sing the alphanumeric keypad
4.7.1 A lphanumeric input
The meter has a screen keypad for entering IDs, SNs and PINs. Both numbers and letters are al-
lowed for these entries.
When entering a PIN, each character entered will be displayed as ( * ).
1 Press
move downwards.
2 Press READ to confirm the entry.
The line where the position of alphanumeric character is being entered blinks.
3 To end and confirm entry, use softkeys to highlight screen key OK, and press READ to save
the ID.
— or —
4 To delete information, use softkeys to highlight
entered character.
— or —
5 Press MODE/EXIT to return to the upper level of the menu.
The entries are rejected.
4.7.2 E ntering IDs/PIN
The three softkeys and READ key are used for navigating on the keypad and entering the ID/PIN.
Example: WATER
1 If A is highlighted, press
V is highlighted.
2 Press
W is highlighted.
3 Press READ to enter W.
4 Repositioning the highlighted bar to A, T, E and R, and press READ to enter each letter of sam-
ple ID in sequence as described in steps a - c.
5 Reposition the highlighted bar to OK, and press READ to save the sample ID.
18 Operating the pH/ORP/Ion/DO meter SG98 and DO meter SG9
51710917_V02.2011_BA_SG9_98_EnFrEs.indb 16
to move left to highlight number or letter, use
three times.
once.
to move right, and
and press READ to delete the previously
to
21.04.2011 11:45:59