Navigating Between Menus; Navigating Within A Menu - Mettler Toledo SevenGo pro Mode D'emploi

4.5 N avigating between menus
The meter display consists of a measurement frame, softkeys, areas for status icons and under l y-
ing menu areas.
To access the menu areas and to navigate between them, use various softkeys (see "Using the
soft k eys").
1 Press Menu.
2 Press
3 Press
4 Press
5 Press MODE/EXIT to return to the measurement screen.
4.6 N avigating within a menu
This example is based on the Setup menu, but the procedure applies to the other menus as well.
●
Press Menu.
The Setup menu appears and Sample ID is highlighted.
●
Press
●
Press Select to move deeper in the menu for the chosen operation.
●
Continue navigating with
the menu.
●
Press MODE/EXIT to go back to the previous menu.
— or —
●
Press READ to return to the measurement screen directly.
51710917_V02.2011_BA_SG9_98_EnFrEs.indb 15
The Setup menu appears and Sample ID is highlighted.
to highlight the Setup tab.
to highlight the pH/Ion tab (only SG98).
to highlight the DO tab.
as often as needed to navigate to a menu item.
,
Operating the pH/ORP/Ion/DO meter SG98 and DO meter SG9
or Select until the final destination is reached within
17
21.04.2011 11:45:57