Minimize Wear And Avoid Damage - Stihl FSA 65 Notice D'emploi

Minimize Wear and Avoid
Damage
Observing the instructions in this manual
helps reduce the risk of unnecessary
wear and damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in this
instruction manual.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions. This includes in particular:
Alterations or modifications to the
–
product not approved by STIHL.
Using tools or accessories which
–
are neither approved or suitable for
the product or are of a poor quality.
Using the product for purposes for
–
which it was not designed.
Using the product for sports or
–
competitive events.
Consequential damage caused by
–
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
chapter on "Maintenance and Care"
must be performed on a regular basis. If
these maintenance operations cannot
be performed by the owner, they should
be performed by a servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
FSA 65, FSA 85
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
If these maintenance operations are not
carried out as specified, the user
assumes responsibility for any damage
that may occur. Among other things,
this includes:
Damage to the motor due to neglect
–
or deficient maintenance.
Damage to the charger caused by
–
incorrect electrical connection
(voltage).
Corrosion and other consequential
–
damage to the machine, battery and
charger due to improper storage
and use.
Damage to the product resulting
–
from the use of poor quality
replacement parts.
Parts Subject to Wear and Tear
Some parts of the power tool are subject
to normal wear and tear even during
regular operation in accordance with
instructions and, depending on the type
and duration of use, have to be replaced
in good time. Among other parts, this
includes:
Cutting attachment
–
Deflector
–
Battery
–
English
45