Programming The Transmitter - Becker Centronic VarioControl VC420-II Notice De Montage Et D'utilisation

Ensure that there is optimal radio reception.

Programming the transmitter

Caution
•
Risk of injury due to electric shock.
•
Connection may only be performed by a qualified electri-
cian!
• The device only offers back-of-hand protection, not
touch protection.
• Only operate the programming button with an insulated
tool.
•
Always take into account the device switching current.
Putting the radio receiver into programming mode
a) Putting the radio receiver into programming mode by switching on
the power
Switch on the power.
► The radio receiver remains ready for programming for 3 minutes.
b) Putting the radio receiver into programming mode with the program-
ming button
Press the programming button for 3 seconds.
► The radio receiver remains ready for programming for 3 minutes.
33 - en