Technical Data For The Flush-Mounted Radio Receiver - Becker Centronic VarioControl VC420-II Notice De Montage Et D'utilisation

Deleting intermediate position I
Move the blind to intermediate position I.
First press and hold the STOP button and, within the next 3 seconds, press
and hold the DOWN button. Keep both buttons depressed until
▻ the receiver confirms.
► Intermediate position I is now deleted.
Technical data for the flush-mounted
Rated voltage
Switching current
Degree of protection
Class of protection
(dependent on correct assembly)
Permissible ambient temperature
Roller shutter running time
Blind running time
Type of mounting
Radio frequency
radio receiver
230-240 V AC / 50 Hz
3 A /230-240 V AC at cos
IP 20
II
-25 to +55 °C
2 min.
3 min.
Flush mounted Ø 58 mm, wall moun-
ted/surface mounted in appropriate
surface mounted housing
868.3 MHz
=1
43 - en