Playback; Playing A Disc; Playing A Usb Device - Sony MEX-M100BT Mode D'emploi

To store channels
1
While receiving the channel that you want to store,
press and hold a number button (1 to 6) until [MEM]
appears.
To receive the stored channel, press MODE to select
[SXM1], [SXM2] or [SXM3], then press a number
button (1 to 6).
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [SET GENERAL]  [SET PARENTAL] 
[SET LOCK SELECT]  [SET LOCK-ON].
3
Enter the passcode by rotating the control dial on
the unit or pressing / on the remote
commander.
To move the entry position, press SEEK +/– on the
unit or / on the remote commander.
The initial passcode is [0000].
4
After entering the passcode, press ENTER.
To unlock the channels, select [SET LOCK-OFF].
To change the passcode
1
Press MENU and rotate the control dial.
2
Select [SET GENERAL]  [SET PARENTAL] 
[SET CODE EDIT].
3
Enter the current passcode on the current passcode
input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
To change display items
Press DSPL to change as follows:
Channel Number (Default)  Channel Name  Artist
Name  Song Title  Content Info  Category Name
 Clock*
* Does not appear when [SUB DISPLAY] is set to
[CLOCK] (page 22).

Playback

Playing a Disc

1
Insert the disc (label side up).
Playback starts automatically.

Playing a USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 23) or visit the support site on
the back cover.
MSC (Mass Storage Class) and MTP (Media Transfer
Protocol) type USB devices (such as a USB flash
drive, digital media player, Android smartphone)
compliant with the USB standard can be used.
Depending on the digital media player or Android
smartphone, setting the USB connection mode to
MTP is required.
Notes
 For details on the compatibility of your USB device,
visit the support site on the back cover.
 Playback of the following files is not supported.
MP3/WMA/AAC/FLAC:
 copyright-protected files
 DRM (Digital Rights Management) files
 Multi-channel audio files
MP3/WMA/AAC:
 lossless compression files
WAV:
 Multi-channel audio files
1
Connect a USB device to the USB port
(page 10).
Playback starts.
If a device is already connected, to start
playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is
recognized).
2
Adjust the volume on this unit.
13
GB