First Use - TEFAL CLIPSO ONE P4241461 Guide De L'utilisateur

TE_CLIPSO-ONE_4137343_IFU-TEFAL-CLIPSO ONE 05/11/12 10:19 Page3
Using the operating valve
• Place the valve (A) on the steam release conduit (C) by aligning the
•
pictogram with the valve position tab (D)
valve
• Press all the way down
- fig 9
position
To cook delicate foods and vegetables
• Position the valve 1 pictogram opposite the positioning mark (D).
To cook meat, fish and frozen food
• Position the valve
To remove the operating valve
• Press the operating valve (A) and align its
positioning mark (D)
• Remove the valve
- fig 8 -
and turn the valve to the cooking
2
pictogram opposite the positioning mark (D).
•
- fig 10
- fig 11
• Clip the tripod (J) under the steaming basket (I)
• Place the steaming basket (I) in the bottom of the pressure cooker
- fig 7
• Fill the pressure cooker with water, up to the 2/3rds mark (M).
• Close the pressure cooker.
• Fit the operating valve (A) and set it to position
• Place your pressure cooker on a heat source set to maximum power.
• When steam starts to escape from the valve, reduce the heat and
time off 20 minutes.
• Once the 20 minutes are up, turn off the heat.
• Turn the operating valve to the
• Once the pressure indicator (G) drops down, your pressure cooker is
no longer under pressure.
• Open the pressure cooker
- fig 8
pictogram with the
position.
- fig 1
EN

First use

- figs 5 and 6
2
.
3