Automatic Icemaker; Icemaker Accessory Kit - GE CustomStyle 22 Manuel D'utilisation

About the automatic icemaker.
A newly-installed refrigerator may take 8 to 12 hours to begin making ice.
Icemaker
Feeler arm
in the STOP
(up) position
Ice Storage Bin
Feeler arm
in the ON
(down) position

Automatic Icemaker

(on some models)
The icemaker will produce eight cubes per
cycle—approximately 100 cubes in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number
of door openings and other use conditions.
If the refrigerator is operated before the
water connection is made to the icemaker,
keep the feeler arm in the STOP (up)
position.
When the refrigerator has been connected
to the water supply, move the feeler arm to
the ON (down) position.

Icemaker Accessory Kit

If your refrigerator did not come already
equipped with an automatic icemaker,
an icemaker accessory kit is available at
extra cost.
The icemaker will fill with water when the
freezer is cold enough. A newly-installed
refrigerator may take 8 to 12 hours to begin
making ice cubes.
Throw away the first few batches of ice to
allow the water line to clear of any debris.
Be sure nothing interferes with the swing of
the feeler arm.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy and taste stale.
Check the back of the refrigerator for
the specific icemaker kit needed for
your model.
9