JVC KD-AR300 Manuel D'instructions page 26

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To select the external component to use
—EXT IN
(only for KD-AR300)
You can connect the external component to the
CD changer jack on the rear using an adapter
specially designed for the external component.
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
• SIRIUS:
To use the JVC SIRIUS Radio.
Notes:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• For connecting the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate volume).
To turn the tag display on or off
—TAG DISP
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
When shipped from the factory, "TAG ON" is
selected.
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
• If an MP3 file does not have ID3
tags, folder name and file
name appear.
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)
26
To select the amplifier gain control
—AMP GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select "LOW PWR"
to prevent them from being damaged.
When shipped from the factory, "HIGH PWR" is
selected.
• LOW PWR: You can adjust the volume level
from "VOL 00" to "VOL 30."
Note:
If you change the setting from "HIGH
PWR" to "LOW PWR" while
listening at a volume level more than
30, the unit automatically changes the
volume level to "VOL 30."
• HIGH PWR: You can adjust the volume level
from "VOL 00" to "VOL 50."

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-g300

Table des Matières