Service And Repairs; Replacement Parts; Polarized Plugs - Hitachi C 7YA Mode D'emploi Et Instructions De Securite

50. Before setting the tool down after completing a cut, be sure that the lower (telescoping)
guard has closed and the blade has come to a complete stop.
51. Never attempt to saw any material like metal and so on that give off sparks. Such action
can lead to fire or injury.
52. Never attempt to saw with the circular saw
held upside down in a vise. This is extremely
dangerous and can lead to serious accidents.
(Fig. 7)

SERVICE AND REPAIRS

All quality power tools will eventually require servicing or replacement of parts because of
wear from normal use. To assure that only genuine replacement parts will be used, all service
and repairs must be performed by a HITACHI AUTHORIZED SERVICE CENTER, ONLY.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.

POLARIZED PLUGS

To reduce the risk of electrick shock, this equipment has a polarized plug (one blade is wider
than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
English
Vise
Fig. 7
9