Operation By Remote Control - GUTMANN FLOTAR 9200EM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
EN
Operation via remote control
ON / OFF (1)
To switch on, press the field with the ON / OFF symbol. The fan starts at power level 1.
To switch off, press the ON / OFF symbol again.
Increase fan power (2)
Press the Increase fan power icon. The fan power increases by one power level each
time the button is pressed.
Reduce fan power (3)
Press the Reduce fan power icon. The fan power decreases by one power level up to
power level 1 with each press.
Illumination (4)
Press the button with the light icon to turn on the light.
Press the button again to turn off the backlight. If the
lighting symbol is held down for a longer time, the lighting
is dimmed. (LED lighting not dimmable)
Colour temperature setting TW
( tuneable white )
The colour temperature of the LED lighting can be infini-
tely
adjusted
between
2700K
and
6500K.
Press and hold the delay button (6) to adjust, the LEDs
start to change the colour temperature. When the desired
setting is reached, release the button, the colour setting
is saved.
int
Intensive level (5)
The maximum fan output is reached by pressing the In-
tensive level button. The fan power switches back by one
power level after 5 minutes.
Automatic follow-up time (6)
Touching the field with the follow-up time symbol activa-
tes the automatic follow-up time and the follow-up time
symbol flashes. The cooker hood switches back from the
current level one level down at 5-minute intervals and
switches off definitively after maximum 15 min.
Filter saturation indicator (F)
If the red LED lights up or flashes, the metal filters must
be cleaned (see section Cleaning and Care). The filter
saturation indicator lights up after max. 15 operating
hours (even if no cooking takes place). The filter saturati-
on indicator will be reset by pressing the key (1) (~10
sec.) until the red LED turns off. ( Device must be in ON
mode - TW function is deactivated when the red LED
flashes ! )
Note : If the RC functions are limited or not available
please check battery capacity first.
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières