Product Description; The Remote Control - GUTMANN LLANO EM 32 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
EN

Product description

1 Hood body
2 Hinged glass panel
3 Metal filter
4 ON-OFF switch, IR sensor
5 Lighting
6 linkage
The Llano hood represents a further
innovation in the long line of design and
technical ideas from the GUTMANN
Company. The model is entirely integrat-
ed into the ceiling – created for those
who like full head clearance when cook-
ing and who wish to have their own indi-
vidual style reflected in the kitchen.
The mode of operation:
Due to the suction at the edge of the
glass panel of the hood, (edge extrac-
tion), a flow is created underneath the
ceiling, which flows towards the hood
due to the application of innovative tech-
nology. Fumes and vapours rise up-
wards due to their own thermal dynam-
ics, are collected there by the circulating
flow and extracted by the hood.
Instruction Manual
The functions of the hood as well as the
power level of the external motor can be
controlled in two different ways:
1. Operation via remote control
(recommended)
14
2. Operation via switch
When cooking in front, open glass

The remote control

ON/OFF
To switch on, press the field with the
ON/OFF symbol. The fan runs at the 3.
level. To switch off, press the ON/OFF
symbol again. Increasing fan power
Press the symbol Increase fan power.
The fan power is increased by one level
each time the field is pressed.
Reducing fan power.
Press the symbol Reduce fan power.
The fan power is reduced by one level
each time the field is pressed until level
1 is reached.
Lighting
Press the button with the lighting symbol
to switch on the lighting. The lighting is
switched off by pressing the button
again. The lighting is dimmed by press-
ing and holding the lighting symbol.
Intensive level
Maximum fan power is reached by
pressing the button Intensive level. The
fan power switches back by one level
after 5 minutes.
Automatic follow-up time
The automatic follow-up time is activat-
ed by pressing the field with the Follow-
up time symbol. The follow-up time sym-
bol (LED) lights up. The extractor hood
switches from level 3 back top level 1
and runs at this level ~15 minutes be-
fore switching off.
Filter saturation indicator
If the grease filter indicator lights up red,
the filter must be cleaned.
After cleaning the filter, keep the On/Off
key pressed for ~ 15 sec. until the red
indicator light goes out.

Publicité

Table des Matières
loading

Table des Matières