Turning On/Off The Power; Initial Setup - Sharp LB-1085 Mode D'emploi

Turning On/Off the Power

Initial Setup

When you turn on the LCD Monitor for the first time,
initial setup menu screen will appear. Set desired
"Language" and "Monitor Location".
Press POWER on the LCD Monitor, or POWER on the remote
control unit to turn the power on.
•
POWER indicator (Blue): The LCD Monitor is on. (After a few seconds,
a window appears with sound.)
POWER
• The initial setup starts when the LCD Monitor powers on for the first
time. If the LCD Monitor has been turned on before, the initial setup will
not be invoked. For changing the settings of the initial setup, perform
EZ setup on the Setup menu on page 26.
•
When the main POWER is off, you cannot turn on the LCD Monitor by
pressing POWER.
Press POWER on the LCD Monitor, or POWER on the remote
control unit again to turn the power off.
POWER
•
The LCD Monitor enters standby and the image on the screen
(On/Standby)
disappears.
•
The POWER indicator on the LCD Monitor turns off.
•
If you ar
sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the LCD Monitor is in
standby mode.
e not going to use this LCD Monitor for a long period of time, be
Language (Language setting)
1 Press /
listed on the screen, and then press ENTER.
Language
Monitor Location
Monitor Location
Select "Home" or "Store" for the location where you
plan to install the LCD Monitor.
2 Press /
Press ENTER to enter the setting.
Language
Monitor Location
• If you select "Home", AV MODE is set to "STANDARD".
• If you select "Store", AV MODE is set to
"DYNAMIC (Fixed)".
If there is no operation for 30 minutes, AV MODE will
return to "DYNAMIC (Fixed)" automatically, regardless
of previous changes to the AV MODE settings.
•
For changing the Monitor Location after the setting,
see "EZ Setup" on page 26.
to select the desired language
English
Français
Español
Deutsch
to select "Home" or "Store".
Example
Home Store
17