Sleep Timer; Input; Av Mode - Sharp LB-1085 Mode D'emploi

Direct Button Operation

Sleep Timer

Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press SLEEP.
•
The remaining time displays when the sleep timer has
been set.
•
Each time you press SLEEP, the remaining time
switches as shown below.
Off 30 60 90 120 (minute)
•
When set, the time automatically starts counting down.
•
If you want to adjust the sleep timer, you can press
SLEEP twice then change the time setting.
• Five minutes before the time expires, the remaining
time displays every minute.
•
Select "Off" by pressing
timer.
•
The LCD Monitor will enter standby when the
remaining time reaches zero.
•
When the sleep timer is set, its indicator on the LCD
Monitor lights red.

INPUT

To view external source images, select the input
source using INPUT on the remote control unit or
on the LCD Monitor.
1
Press INPUT.
•
A list of selectable sources appears.
2 Press INPUT again or press
the input source.
•
An image from the selected source automatically
displays.
•
Each time INPUT is pressed, the input source
toggles.
•
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
• See pages 14 to 16 for external equipment connection.
SLEEP to cancel the sleep
/ to select

AV MODE

AV MODE gives you several viewing options
to choose from to best match the surrounding
environment of the LCD Monitor, type of program
watched or the type of image input from external
equipment.
Press AV MODE.
• Current AV MODE displays.
•
Press AV MODE again before the mode displayed on
the screen disappears. The mode changes as shown
below:
Example:
When the input source is INPUT 1, 2 or 3
terminals
STANDARD MOVIE
DYNAMIC
Example:
When the input source is INPUT 4, 5, 6 or 7
terminals
STANDARD MOVIE
DYNAMIC DYNAMIC (Fixed)
STANDARD: For a normal screen.
[Enhanced Picture Contrast: on]
MOVIE: For a movie.
[Enhanced Picture Contrast: off]
GAME: Lowers image brightness for easier viewing.
[Enhanced Picture Contrast: off]
PC: For PC.
[Enhanced Picture Contrast: off]
USER: Allows the user to customize settings as
desired. You can set the mode for each input
source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed): Changes the image and
sound settings to the factory preset values. No
adjustments are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
[Enhanced Picture Contrast: on]
• You can select a different AV MODE item for each
input mode. (For example, select STANDARD for
INPUT 1 and DYNAMIC for INPUT 2.)
•
When you play games, "GAME" is recommended for
AV MODE.
•
"Enhanced Picture Contrast" technology detects the
source video characteristics and smoothly adjusts the
screen brightness accordingly to realize deeper black
levels.
GAME USER [ ]
DYNAMIC (Fixed)
GAME PC
USER [ ]
19