Handy Features (For Tv/Av Mode); Pausing The Screen (Freeze); Returning To Previous Channel (Flashback); Switching Power Off After A Specified Length Of Time (Sleep) - Sharp LL-171ME Mode D'emploi

Handy features (for TV/AV mode)

Pausing the screen (FREEZE)

This feature pauses the image from the TV or other
connected AV equipment. This is handy when you
want to write down a recipe or the address for a
prize contest.
Perform this operation using the remote control.
1. Press the FREEZE/HOLD button.
The images will pause.
Cancelling pausing
1. Press the FREEZE/HOLD button again.
Notes:
- You cannot pause the TV or video image in the
picture-in-picture window.
- Changing channels or switching the display
mode (input) automatically cancels pausing.
Returning to previous channel
(FLASHBACK)
You can return to the previous channel you were
watching.
Perform this procedure with remote control.
1. Press the button.
The monitor will return to the channel you were
previously watching.
Switching power off after a specified
length of time (SLEEP)
The monitor can automatically switch off (standby)
after a specified length of time. This is handy if you
want to watch the monitor at bedtime.
Perform this operation using the remote control.
1. Press the SLEEP button.
2. Specify in how many minutes you want the
monitor to switch off by pressing the SLEEP
button.
The time changes in the following order each
time you press the button:
30 min → 60 min → 90 min → 120 min →
150 min → --- min → 30 min
When the specified time elapses, the monitor
automatically switches off and clears the SLEEP
timer.
Checking the time remaining on the SLEEP
timer
1. Press the DISPLAY button.
The time remaining on the SLEEP timer will be
displayed for several seconds. You can also
check the time remaining by pressing the SLEEP
button once.
Changing the specified time
1. Press the SLEEP button.
The remaining time will be displayed.
2. Change the specified time by pressing the
SLEEP button several times as needed.
Notes:
- When there are only 5 minutes remaining on the
SLEEP timer, the remaining time will be
displayed every minute.
- Pressing the POWER button while the SLEEP
timer is operating will clear the timer.
- Switching to PC mode automatically clears the
SLEEP timer.
- You can also set the SLEEP timer from the
MODE SELECT menu. (See page E46.)
E43