Other Features; Checking The Current Channel And Audio Reception Mode On Screen (Display); Changing Bright Mode; Muting The Sound (Mute) - Sharp LL-171ME Mode D'emploi

Checking the current channel and
audio reception mode on screen
(DISPLAY)
You can check the current display mode, channel
being received, audio reception mode, and time
remaining on the SLEEP timer.
Perform this operation using the remote control.
1. Press the DISPLAY button.
Various information about the current state will
be displayed.
The information will disappear after several
seconds.
Notes:
- The information displayed will vary depending
on the current display mode and other settings.
- If the broadcast changes in TV mode while the
information is displaying, the broadcast and the
audio reception mode may not match.

Changing BRIGHT MODE

You can lower energy consumption by decreasing
screen brightness.
1. Press the OK/BRIGHT MODE button (monitor) or
the BRIGHT MODE button (remote control).
The mode switches in the following order each
time you press the button:
[PC mode]
DARK (power save) → BRIGHT →
DARK (power save)...
[TV/AV mode]
NORMAL (power save 1) → DARK (power save 2) →
BRIGHT → NORMAL (power save 1)...

Other features

Muting the sound (MUTE)

This feature is handy when you want to mute the
sound such as when the phone rings or someone
comes to the door.
Perform this operation using the remote control.
1. Press the
The sound will be muted and "MUTE" will be
displayed.
"MUTE" will disappear after several seconds.
Cancelling muting
1. Press the
buttons.
Changing the screen size
(VIEW MODE)
You can change the screen size to match the video
on videotapes and DVDs.
Perform this operation using the remote control.
1. Press the VIEW MODE button.
The mode switches in the following order each
time you press the button:
[PC mode]
NORMAL → WIDE → NORMAL...
NORMAL: Expands the image to or near its aspect ratio.
WIDE:
[TV/AV mode]
NORMAL → WIDE → ZOOM1 → ZOOM2 → NORMAL...
NORMAL: Displays the screen at 4:3.
WIDE:
ZOOM1:
ZOOM2:
Notes:
- When you select "ZOOM1" or "ZOOM2" in TV/AV
mode, the top and bottom of the screen will be
cut off slightly.
- You can set this item individually for PC mode
and TV/AV mode in the MODE SELECT menu.
(See pages E25 and E46.)
E47
button.
button again, or press any other
Expands the image so that it fills the screen.
Displays the screen at 16:9.
Enlarges and displays the entire
screen, but with a smaller screen size
than "ZOOM2". Please use this mode
when captions or telops at the top or
bottom of the screen are cut off.
Enlarges and displays the entire screen at 4:3.