Audio Menu; Surround; Power Control Menu; No Signal Off - Sharp LB-1085 Mode D'emploi

On-Screen Display Menu

Audio Menu

You can adjust the sound quality to your preference
with the following settings.
Example
Audio

Treble

[ 0] -15

Bass

[ 0] -15

Balance

[ 0]

Surround

Reset

1
Press MENU to display the MENU screen, and
then press / to select "Audio".
to select a specific adjustment
2 Press /
item.
•
Select "Surround" and then press
the item.
3 Press / (or
setting, and then press ENTER.
Press MENU to exit.
4
Selected item button
Treble
For weaker treble For stronger treble
For weaker bass
Bass
Balance
Decrease audio
from the right
speaker
•
Audio menu is grayed out when Output Select is set to
"Variable".
•
For resetting all Audio adjustment items to the factory
preset values, press
ENTER, press / to select "Yes", and then press
ENTER.

Surround

Surround function allows you to enjoy realistic "live"
sound.
On: Surround function is on.
Off: Normal sound.
•
Audio menu is grayed out when Output Select is set to
"Variable".
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation
manual of your DVD player.
+15
+15
R
L
[Off]
ENTER to set
/ ) to select the desired
button
For stronger bass
Decrease audio
from the left
speaker
/ to select "Reset", press

Power Control Menu

Power control setting allows you to save energy.
Example
Power Control

No Signal Off

No Operation Off

1 Press MENU to display the MENU screen, and
then press / to select "Power Control".
2 Press / to select a "No Signal Off" or "No
Operation Off", and then press ENTER.
3 Press / to select "Enable", and then press
ENTER.
Press MENU to exit.
4

No Signal Off

When set to "Enable", the power will automatically
shut down if there is no signal for 15 minutes.
•
Five minutes before the power shuts down, the
remaining time displays every minute.
•
"Disable" is the factory preset value.
• You can view TV broadcasts on the LCD Monitor if you
use external equipment such as a TV tuner. Be aware
that the "No Signal Off" function may not work even
when the TV program you are viewing finishes.

No Operation Off

When set to "Enable", the power will automatically
shut down if there is no operation for 3 hours.
•
Five minutes before the power shuts down, the
remaining time displays every minute.
•
"Disable" is the factory preset value.
[Disable]
[Disable]
25