Safety Considerations; Important - Dustcontrol DC1800 Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions. If not this safety con-
sideration follows the guarantee is not valid and personal
injury and machine damage can be caused.
Warning! When using electric machines, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury, including the
following:
1.

Important!

No hot particles nor ignition sources are allowed to be
sucked into the unit. The machine should not be used
for explosives, unstable or pyrophoric particles.
– WARNING Operators shall be adequately instruc-
ted on the use of these machines.
– WARNING This machine is for dry use only.
– CAUTION This machine is for indoor use only.
– CAUTION This machine shall be stored indoors
only.
2. Work area environment
Don´t expose the machine for rain. Don´t use it in damp
or wet locations or in presence of flammable liquids or
gases.
3.
Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the material you are
working with ie asbestos. Don´t use the machine for
purposes that it isn´t intended for.
4. Body injuries
Never let the suction come in contact with parts of
the body. The strong suction effect can hurt the blood-
vessels in the skin. Don´t repair the electric components
yourself. The machine should be serviced by qualified
personnel only. Faults may cause injury. See also below
under warnings.
5.
Don´t abuse cord
Never pull the machine by the cord. Keep the cord
from heat and sharp edges. Check the electric cable
regularly for damage.
2014-02-25
6. Important measure
With cleaning and maintenance on the machine,
the power cable should be dis-connected from the
supply.
7.
Maintain the machine with care
Keep the machine clean and check that the hose is
undamaged and that all gaskets are tight. Follow
instructions. Keep handles dry and free from oil and
grease.
8. Checking for damage
Before futher use of the machine it should be carefully
checked that the machine is unda-maged. If there
are any damaged parts these should be repaired by a
Dustcontrol authorized service center.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
9.
Warning
Use only accessories and replacable parts which are
available in the Dustcontrol catalogue. Note! If you use
wrong spare parts (filter and collection sacks) the mach-
ine can leak hazardous dust which can cause personal
injury. The handle on the top of the machine can only
be used by manual power and empty container. The
machine in constructed for a maximal totalweight of
40 Kg. Higher loading can cause damage.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
This machine is intended for commercial use
only, for example in hotels, schools, hospitals,
factories,shops, offices and rental businesses.
DC 1800 - 10
Part No 94114-C

Publicité

Table des Matières
loading

Table des Matières