Safety Considerations; Technical Data - Dustcontrol DC 5800c PTFE Manuel D'instruction

Safety Considerations

Read all instructions before attempting to operate
this machine and save these instructions.
Warning! When using electric machines, basic
safety precuations should always be followed to
reduce the risk of fi re, electric shock and personal
injury, including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with
parts of the body. The strong suction effect can
hurt the blood-vessels in the skin. Do not re-
pair the electric components yourself, get
somebody qualifi ed. Faults may cause injury.
See also below under warnings.

TECHNICAL DATA

HxWxL
Weight
Inlet
Collecting sack
Hose length (φ 50)
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter PTFE* area
Degree of separation
(DIN 24184/3)
Filter area, microfi lter
Degree of separation,
microfi lter (DOP)
Sound level **
Sound eff ect level
* Please see page 2.
** Sound level at 1.6 m height and 1 m distance according to DIN 45635 Section 1 (4/84) in free space
and at maximum airfl ow.
50 Hz 60 Hz
1950x760x1000 mm
ca 170 kg ca 190 kg
φ 76 mm φ 76 mm
70 l 70 l
5-30 m 5-30 m
3 3
470 m /h 600 m /h
28 kPa 31 kPa
5/5.5 kW 7.5 kW
2 2
5 m 5 m
99,9 % 99,9 %
2 2
2.5 m 2.5 m
> 99.97 % > 99.97 %
< 75 dB(A) < 75 dB(A)
89 dB 89 dB
DC 5800c PTFE 5 kW - 8
4. Don´t abuse cord
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.
5. Important measure
With cleaning and maintenance on the mach-
ine, the power cable should be disconnected
from the supply.
6. Maintain the machine with care
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
7. Checking of damage
Before futher use of the machine it should
be carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
8. Warning
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
Capacity
kPa
40
20
5 kW
100 200
7.5 kW 60 Hz
300 400 500 m 3 /h
Part No 9475