[Getting To Know The Laser Rangefinder] Key Features - Nikon ARROW ID 7000 VR Manuel D'utilisation

SAFETY PRECAUTIONS CARE AND MAINTENANCE
En
Cautions Lenses
Fr
• This product is not designed for use • When removing dust on the lens
underwater. surface, use a soft oil-free brush.
• Rain, water, sand and mud should • When removing stains or smudges
be removed from the rangefinder like fingerprints from the lens
body surface as soon as possible, surface, wipe the lenses very gently
using a soft, clean cloth. with a soft clean cotton cloth or
• If the Nikon Laser Rangefinder is quality oil-free lens tissue. Use a
exposed to sudden changes in small quantity of pure alcohol (not
temperature, water condensation denatured) to wipe stubborn
may occur on lens surfaces. Do smudges. Do not use velvet cloth
not use the product until the or ordinary tissue, as it may scratch
condensation has evaporated. the lens surface. Once the cloth has
• Do not leave the Nikon Laser been used for cleaning the body, it
Rangefinder in a car on a hot or should not be used again for the
sunny day, or near heat-generating lens surface.
equipment. This may damage or
negatively affect it. Main body
• Do not leave the
• Clean the body surface with a soft,
eyepiece in direct clean cloth after blowing away dust
sunlight.
with a blower* lightly. Do not use
The condenser benzene, thinner, or other cleaners
effect of the lens containing organic solvents.
may damage the
* A blower is rubber cleaning
internal display equipment that blows air from a
surface.
nozzle.
6
Storage
• Water condensation or mold may
occur on the lens surface because
of high humidity. Therefore, store
the Nikon Laser Rangefinder in a
cool, dry place.
After use on a rainy day or at night,
thoroughly dry it at room
temperature, then store in a cool,
dry place.
Symbol for separate collection applicable in European
countries
This symbol indicates that this battery is to be
collected separately.
The following apply only to users in European
countries.
• This battery is designated for separate collection at an
appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
Symbol for separate collection applicable in European
countries
This symbol indicates that this product is to be
collected separately.
The following apply only to users in European
countries.
• This product is designated for separate collection at
an appropriate collection point. Do not dispose of as
household waste.
• For more information, contact the retailer or the local
authorities in charge of waste management.
[Getting to know the Laser Rangefinder]
￭ Key features
• Measurement range of actual distance:
7.3-915 meters/8-1,000 yards
• VR (Vibration Reduction) function is employed for
reducing the vibrations caused by hand movement
・Horizontal distance mode and actual distance mode
can be easily switched
・Target Priority Switching System for measuring
overlapping subjects
• High-quality 6x finder with multilayer coating
• Larger ocular for easy viewing
• Press and hold down the PWR button to activate the
continuous measurement function
• Automatic power shut-off (approx. 8 sec.
unoperated from standby screen)
• Waterproof and fogproof, but not designed
for underwater usage (the battery chamber is
rainproof )
• Invisible/Eyesafe EN/IEC Class 1M Laser
The Nikon Laser Rangefinder uses an invisible
laser beam for measuring. It measures the time the
laser beam takes to travel from the rangefinder
to the target and back. Laser reflectivity and
measurement results may vary according to
climatic and environmental conditions, as well
as the color, surface finish, size, shape and other
characteristics of the target.
The following conditions facilitate measuring:
• Cloudy weather
• Bright-colored target
• Large-size target
• When laser incidence to the target's reflective
surface is straight
Measurement may be inaccurate or fail in the
following cases:
• In snow, rain or fog
• Small or slender target
• Black or dark target
• Target has stepped surface
• Moving or vibrating target
• When measuring the surface of water
• Target measured through glass
• When the target is glass or a mirror
• When laser incidence to the target's reflective
surface is oblique
En
Fr
7