Nikon PROSTAFF 1000i Manuel D'utilisation page 18

„ Changing the distance display unit (F1) (PROSTAFF 1000)
„
For the display unit of the measurement results, select YD (yards) or m (meters). Factory default setting is
En
YD (yard).
Fr
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
• You can now change the distance display unit.
3. The setting switches every time you press the PWR button.
(yard)
• If you press and hold the MODE button or do not operate the buttons for
about 8 seconds, the displayed setting is saved and the Laser Rangefinder
returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
18
(meter)