Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Usage Precautions

Do not place items other than discs in the drive.
Do not leave the disc cover in the open position or touch the lens area. Should the
lens become soiled by dust or dirt, the drive may not read discs properly.
Under some conditions, dust may build up on the optical lens or disc, possibly resulting
in malfunction.
Do not open the drive or move the computer while the drive is being accessed. Doing so
could cause it to malfunction. In addition, after running an application involving access
to a disc, do not open the drive or remove the disc until after the application has been
closed.
Do not expose the drive to oily or tobacco smoke. Doing so could shorten the service
life of the lens.
Cleaning the drive using a blower is recommended if it malfunctions.
Never insert foreign objects such as paper clips into the drive.
Do not use discs that have become deformed (warped, not completely round, etc.).
Do not touch the interface cable while the drive is being accessed. Doing so may cause
the drive and/or computer to malfunction.
Keep the drive away from magnets. Its operation may become unstable due to the ef-
fects of magnetism.
Do not place the drive near a television or radio receiver. If the radio or TV is sharing
the same power outlet as the drive, connect it to a different outlet.
If the computer has both USB2.0 and USB1.1 ports, use the USB2.0 port.
When connection is made to the USB1.1 port, the drive functions as a USB1.1 drive.
When the drive is used as a USB1.1 drive, the picture and sound playback of DVD-Video
discs may be interrupted.
Bottom panel
Initial setting:
Mode Switches
Set all Mode Switches to OFF
when the drive is in use.
E
9

Publicité

Table des Matières
loading

Table des Matières