Disconnecting The Cable - Panasonic CF-VDRRT2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections to the Computer

Disconnecting the cable

Before disconnecting the interface cable, complete the data writing using the writing soft-
ware and the data reading as well as the music playback and other operations, and remove
the disc (media) from the drive.
CAUTION
When using a CD-RW disc with "B's CLiP," move the cursor to the "B's CLiP"
E
icon on the tasktray and right-click it, select [Eject,] and then disconnect the
interface cable.
Be sure follow the procedure below. Unless the correct procedure is observed, it
may not be possible to use the drive when the drive is connected next time.
1
Double-click
then select [Stop].
(When the USB device has been removed after the computer is turned off, this step is
not necessary.)
2
Select [GENERIC CDRCB04 USB Device], then select [OK].
3
Remove the USB device.
Select [Close].
12
on the tasktray and select [USB Mass Storage Device],

Publicité

Table des Matières
loading

Table des Matières