Technical Data - HASE Jena Manuel D'utilisation

12. Technical Data

The Jena B.11, certified in compliance with DIN-EN 13240 : 2005 and Art. 15 a
B-VG (Austria), can only be operated when the fire box is closed; more than one
device can be connected to the chimney. VKF-No.: 18663
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
* Test bench performance and values at 13% O
2
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).
Dimensions: Height
Stove 115,5 cm
Fire box 38 cm
Steel
Weight 166 kg with ceramic
177 kg with soapstone
Wood Briquette
6 6 kW
6 6 kW
290 290 ˚C
5,5 5,5 g/s
12 12 Pa
81,2 80,7 %
946 1188 mg/Nm³
16 39 mg/Nm³
45 96 mg/Nm³
118 128 mg/Nm³
25 25 m³/h
Width Depth
54 cm 49 cm
28 cm 31,5 cm
Ceramic Soapstone
175 kg 219 kg
Flue pipe diameter
Pipe diameter of Hase ventilation system**
Front view Jena
Top view Jena
54
** For separate air supply in low-energy houses and insufficient combustion air supply in the room where
the stove is installed.
15 cm
10 cm
Side view Jena
GB
7 Ø 21
Connection area for the inst.
of Hase air system below
Dimensions in cm
37