Sony XAV-7W Mode D'emploi page 49

CD/MD error messages
When there is a problem related to a CD or MD changer connected to the unit, an alarm tone is
heard and a flashing error indication is shown for 5 seconds.
Error displays Cause
BLANK MD is not recorded.
(Blank Disc*)
ERROR Disc is inserted upside down.
(Error*)
MD cannot be played.
CD is dirty.
HI TEMP Unit has become too hot.
(High Temp*)
NO DISC No disc is inserted in changer.
(NO Disc*)
NO MAG No magazine is inserted in changer.
(NO Magazine*)
NO MUSIC CD does not contain music information.
(NO Music*)
NOTREADY MD changer panel is open.
(Not Ready*)
RESET Operation is impaired due to an unspecified
(Push Reset*) problem.
* Shown in the LCD monitor.
Messages Description
LCL Seek +/– The Local Seek mode is on during automatic tuning (page 20).
" " or You have reached the beginning or the end of the disc and you cannot go any further.
" "
Remedy
Insert other MD.
Insert disc correctly.
Insert other MD.
Clean CD.
Turn power off and wait a while.
Insert disc.
Insert magazine.
Insert other CD.
Close panel.
Press the reset button on the unit.
49