Specification Of The Microloop - CareFusion MicroLoop Manuel D'utilisation

Direct current
Single patient use
Federal U.S. law restricts this device to sale by or
on the order of a physician. (Rx only)
Medical Device listing mark for US and Canada by
SGS Testing Services recognised by the American
Occupational Safety and Health Administration
(OSHA) for electrical safety and compliance.

Specification of the MicroLoop

General:
Storage:
Printer Output:
Display:
Power supply:
Battery Pack:
Battery Life:
Dimensions:
Weight:
Operating Temperature:
Operating Humidity:
Transport and Storage
Temperature:
Transport and Storage
Humidity:
>2000 tests including Flow/Volume
loops and Volume/Time curves
Compatible Hewlett Packard USB
printers (Specified models only).
Colour 1/4VGA LCD.
Input 100 to 240V, 50 to 60Hz.
Output 5V 2.0A (Class I)
Type: MENB1010A0500F02
Rechargeable Lithium Ion Polymer 3.7V
1600mA-hours.
Approximately 30 hours with a fully
charged new battery
120x80x20 mm.
Transducer 50x60x90mm.
200g.
0 to +40 °C
30% to 90% RH
-20 to + 70 °C
10% to 90% RH
46