Accessories; Technical Characteristics - Nice F210S Instructions Et Avertissements Pour L'installation Et L'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18

8) Accessories

Two accessories are available:
• FA1: metal vandal-proof casing, fitted as in fig. 17
• FA2: fixing brackets for "MOCF" posts, fitted as in fig. 18
17

9) Technical characteristics

In order to improve its products, NICE S.p.a. reserves the right to modify the technical characteristics at any time without prior notice. In any case, the
manufacturer guarantees their functionality and fitness for the intended purposes. Note: all technical characteristics refer to a temperature of 20°C.
F210S directional photocell
Product type
Adopted technology
Power supply/communication
Detection capacity
TX transmission angle
RX reception angle
Adjustability of the F210S photocell
Useful range
Maximum range
PHOTO output response time
ALT output response time
Sensitive edge input range (Rs)
Use in acid, saline or potentially explosive
atmosphere
Assembly
Protection class casing
Operating temperature
Dimensions / weight
Max. cable length
* If the measured value passes to 4.1.KΩ ± 20% for at least 300 ms before dropping below the minimum value, the next inter-
vention of the sensitive edge will perform the stop without the short inversion of the manoeuvre.
18
Presence detector for roller shutters or vertical door automation systems (type
D according to EN standard 12453), consisting in a "TX" transmitter and "RX"
receiver.
TX-RX direct optical interpolation with modulated infrared beam
Via TTBUS
Opaque objects located on the optical axis between TX and RX, larger than
50 mm and moving slower than 1.6m/s
+/- 4° (value taken at 50% of the capacity)
+/- 3° (value taken at 50% of the capacity)
Approx. 210° on the horizontal axis and 30° on the vertical axis
7m for maximum TX-RX misalignment ±2°
(the range may be further reduced in the presence of particularly intense
atmospheric conditions: fog, rain, snow, dust, etc.)
15m for maximum TX-RX misalignment ±2°
(capacity guaranteed under optimal conditions)
<30ms (typical 20ms).
<35ms (typical 25ms).
Typical 8.2KΩ; +22% -65% for the on status *
No
Vertically wall mounted or on "MOCF" posts with "FA2" bracket
IP44
-20 ÷ 55°C
46 x 128 h 45mm / 230 g
30m
GB
9

Publicité

Table des Matières
loading

Table des Matières