Time, Date & Language; Date Format; System Shutdown - Dedicated Micros ECO 9 Guide D'installation

Time, Date & Language
Date
As default, the date is entered DD:MM:YYYY on PAL models and
MM:DD:YYYY on NTSC models, this can be changed using the Date format
option below.
Time
The time should be entered in 24 hour format (HH:MM).
Note: Summer and Winter time is signalled by an 'S' or 'W' next to the time.

Date format

The date format can be changed from Day, Month to Month, Day depending on
regional preference.
Language
The menus can be displayed in a number of languages. Upon selection these
are presented as a dropdown list.
Available languages are: English, French, German, Spanish, Italian, Chinese,
Russian, Czech, Polish, Dutch, Hungarian, Swedish and Croatian.
12

System Shutdown

If the Eco9 needs to be switched off for any reason, the shutdown
procedure needs to be followed:
1. Select 'Enabled' in the System Shutdown option.
2. When the pop-up menu appears, press and hold camera 1 for five
seconds to shutdown.
3. The message 'It is now safe to switch off your unit' is displayed, switch
the Eco9 off at the wall.
WARNING: Data loss or disk failure may occur if a system shutdown is
not performed before removing power.
DST
Daylight saving time can be adjusted automatically or manually. By default, the
automatic setting will go forward one hour on the last Sunday in March at
01:00, and one hour back last Sunday in October at 02:00. The default
automatic settings can be changed.
Important: If the country or region where the unit is located does not use DST
then select manual.