Dedicated Micros ECO 9 Guide D'installation page 25

Using
Playing back images from the disk
Playback
• To playback images tap to rewind to the desired location and then
press . Press play for review mode or press and hold play for the GOTO option.
• When in playback, tap or to search rewind or fast forward, multiple taps will
increase the search speed.
• Tap II to pause the current image. Tapping
advance or rewind.
Goto time
Press and hold (GOTO) to play back from a specific time or date.
Enter the required time and date, and press .
Tip: The images are updated in the background automatically when the time and date is
adjusted.
Exit playback
Tap the Mode/Menu key to exit playback mode, the Play LED will go out.
Using the Event log
Alarms and activity detection are tagged and stored in the event log for easy retrieval.
Each event is labelled with event type (alarm or activity), its camera title, time, and date.
To view an event from the event log:
• In Live mode with control of the Main Monitor tap the event key to display
the event log.
• Use and to select the event required, the selected event is displayed in the
preview window.
• Tap to view the event in full screen.
• Tap mode to exit the Event log.
Event Search Filter
It is possible to filter the search by selecting a particular function (alarm, activity or
system) within the time and date and on a specific camera. To enter this option, with the
Event Log displayed press the event key again. This will display the Event Search Filter
menu.
Tip: You can enter this menu by pressing and holding the event key.
or whilst paused will frame
Viewing single cameras
Full
Pressing a camera key will display a full screen image of that camera.
Zooming an image
Press the same camera key to toggle zoom on and off.
When zoom is enabled, use
Note: Zoom is not available in playback mode.
Freezing an image
Double tap the camera key toggle freeze frame on or off.
Viewing multiple cameras
Picture in Picture
Press the PIP key to toggle the main and PIP image.
Press and hold the PIP key to edit the display, use
segment, press the required camera key to fill that segment.
Press Mode/Menu to exit.
Quad
Press the QUAD key to switch to quad display.
Press and hold the QUAD key to edit the display, use
segment, press the required camera key to fill that segment.
Press Mode/Menu to exit.
Multiscreen
Press the multiscreen key to toggle between a 9-way, 6-Way or an 8+2 display.
Press and hold the Multiscreen key to edit the display, use
the segment, press the required camera key to fill that segment.
Press Mode/Menu to exit.
Sequencing cameras
Sequence
Press the sequence key to toggle the main monitor sequence on or off.
Press and hold the sequence key to edit the sequence.
Use the camera keys to include or remove cameras from the sequence.
Press Mode/Menu to exit.
Note: The spot monitor sequence can only be activated or edited in spot mode.
to scroll around the image
to select the
to select the
to select