Dedicated Micros ECO 9 Guide D'installation page 26

Viewing cameras on the Spot monitor
Press the mode key to toggle 'spot' mode, indicated on the main monitor and the front
panel LED. Press a camera key to display that camera on the spot monitor or tap the
sequence key to sequence the cameras.
Copying images to CD
1. Insert a blank CDR or pre-formatted CD-RW into the CD writer.
2. Press and hold the COPY key to display the following screen.
3. Use the cursor keys to change the time to copy 'to and from'.
Copy destination This is the name and type of CD drive connected to
the SCSI port or the internal CD writer.
Copy from time Select the time you wish to copy images from.
Copy to time Select the time you wish to copy images to.
Copy Select 'All cameras' or individual cameras to copy using the
camera keys (filled boxes are selected cameras, unfilled
boxes are not selected).
TIP: You can display this page directly by pressing and holding the COPY key and enter
the copy time manually, rather than the first and last image.
Once the 'Copy images' page is complete, press the menu key to display the following
menu:
This menu displays the archive list of images to be copied to the CD, the 'CD Use' bar
indicates the how much space is available on the CD, once it reaches 100% no more
images can be added to the archive.
Add next Add the selected times to the archive list.
Create CD Creates a CD with the images in the list.
Verify CD Verify that the CD has been written correctly.
Clear list Removes all entries from the list.
To select any of the above options, highlight the option and tap Mode/Menu . To add
images to the CD:
1. Select 'Add next' and press the Mode/Menu key to add the displayed time
to the list.
2. You may wish to add more images to the CDR archive if the CD is not yet full. To
select more images to add to the list press
3. Once all the required images are added to the archive list, select 'Create CD' and
press the Mode/Menu key to create the CD.
4. "Disk burn OK. Press Mode/Menu to Continue" will be displayed. Verify CD or Clear
list options are available at this stage.
5. Press and hold the Mode/Menu key to exit the CDR Archive option.
to return to the 'Copy images' screen.