Important Safeguards - Dedicated Micros ECO 9 Guide D'installation

Important Safeguards

Read Instructions
All the safety and operating instructions should be read before the unit
is operated.
Power Sources
This unit should be operated only from the type of power source
indicated on the manufacturer's label.
Servicing
Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Ventilation
Ensure unit is properly ventilated to protect from overheating.
WARNING
To prevent fire or shock hazard, do not expose this equipment to rain or
moisture. The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user of this equipment that there are dangerous
voltages within the enclosure which may be of sufficient magnitude to
constitute a risk of electric shock.
WARNING
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
The Eco9 is available with an integrated CD, please pay particular attention to
the following warnings when installing and using this model.
• Caution - Use of controls or adjustments of performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
• To prevent exposure to laser emanations (harmful to the eyes), do not
attempt to disassemble this unit.
LIGHTNING STRIKE
The Eco9 has some in-built protection for lightening strike, however it is
recommended that isolation transformers be fitted to the system in areas
where lightening is a common occurrence.
REGULATORY NOTES FCC AND DOC INFORMATION
(USA and Canadian Models Only)
WARNING: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at their own expense. If necessary,
the user should consult the dealer or an experienced radio/television technician
for corrective action. The user may find the following booklet prepared by the
Federal Communications Commission helpful: "How to Identify and Resolve
Radio-TV Interference Problems". This booklet is available from the US
Government Printing Office, Washington, DC20402, Stock No. 004-000-00345-
4.
3